Display 3D model
Service hotline
+86 0755-83044319
SL4139 is a DC/DC boost converter that provides precise constant current drive for multiple LEDs. With a fixed switching frequency of 1MHz, SL4139 can be paired with small external ceramic capacitors and inductors. Adjustable current, set by external resistor R1, allows SL4139 to drive series-connected LEDs. It is suitable for driving LEDs of the same type, with up to 9 white LEDs in series or a maximum driving voltage of 32V. LED brightness can be adjusted using a DC voltage, logic signal, or pulse width modulation (PWM). The shutdown control pin (SHDN) enables the device to operate in ultra-low static current standby mode.In addition to thermal protection and overcurrent limiting, SL4139 enters ultra-low power mode in the event of LED open-circuit faults. The chip is packaged in a small SOT23-5 form factor.
Download datasheet Inquiry
Our advantages
Chinese manufacturing processes have undergone years of iteration, resulting in mature and reliable technologies. Many international corporations opt for production outsourcing in China. As an electronic components manufacturer in China, our products can fully replace those of major international brands in 99% of applications without the need for testing verification. Our products boast high consistency in quality, reasonable pricing, ample inventory, flexible supply, short lead times, and professional after-sales service.
Description
SL4139 is a DC/DC boost converter that provides precise constant current drive for multiple LEDs. With a fixed switching frequency of 1MHz, SL4139 can be paired with small external ceramic capacitors and inductors. Adjustable current, set by external resistor R1, allows SL4139 to drive series-connected LEDs. It is suitable for driving LEDs of the same type, with up to 9 white LEDs in series or a maximum driving voltage of 32V. LED brightness can be adjusted using a DC voltage, logic signal, or pulse width modulation (PWM). The shutdown control pin (SHDN) enables the device to operate in ultra-low static current standby mode.In addition to thermal protection and overcurrent limiting, SL4139 enters ultra-low power mode in the event of LED open-circuit faults. The chip is packaged in a small SOT23-5 form factor.
Features
● Switch peak current: 1A
● Maximum driving voltage: 32V
● Maximum power conversion efficiency: 90%
● Shutdown current less than 10uA
● Fixed frequency of 1MHz with low noise
● Surge current limitation during soft start
● LED open-circuit overvoltage protection
● 3.3V undervoltage lockout (UVLO)
● Overtemperature protection
● Suitable for automotive electronics
● RoHS compliant
● Industrial grade (-40°C to +85°C)
Application
● SL4139 is a fixed-frequency (1MHz), low-noise, inductor boost converter that provides constant current with excellent linearity and load regulation. The device utilizes a high-voltage NMOS switch between the SW pin and GND pin to drive the inductor. When the NMOS switch is turned off, energy stored in the inductor is discharged to the load through a Schottky diode.
● The duty cycle of the NMOS switch is adjusted and controlled internally based on the feedback voltage at the FB pin, ultimately outputting a constant regulation voltage of 0.3V at FB. The current flowing through the LED is inversely proportional to the resistance value (I = 0.3V/R1).
● During initial power-up, the duty cycle of the internal NMOS switch is limited to restrain surge current, providing a soft-start operation.
● In the event of an LED open circuit, the feedback control loop opens, causing the output voltage to continue increasing. Once the output voltage exceeds 37V, internal protection circuits activate, placing the device into a low-power safe mode.
● The device includes over-temperature protection circuitry that disables operation automatically when the junction temperature exceeds 150°C, and resumes normal operation once the temperature decreases to 130°C.
| File Name | Title | Description |
|---|---|---|
| SL4139.pdf | SL4139 | - |
Support
If you need design/technical support, please let us know and fill inResponse FormWe will get back to you as soon as possible.
Longevity
The Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our executive Management Team. View ourlongevity programhere.
SL4139 is a DC/DC boost converter that provides precise constant current drive for multiple LEDs. With a fixed switching frequency of 1MHz, SL4139 can be paired with small external ceramic capacitors and inductors. Adjustable current, set by external resistor R1, allows SL4139 to drive series-connected LEDs. It is suitable for driving LEDs of the same type, with up to 9 white LEDs in series or a maximum driving voltage of 32V. LED brightness can be adjusted using a DC voltage, logic signal, or pulse width modulation (PWM). The shutdown control pin (SHDN) enables the device to operate in ultra-low static current standby mode.In addition to thermal protection and overcurrent limiting, SL4139 enters ultra-low power mode in the event of LED open-circuit faults. The chip is packaged in a small SOT23-5 form factor.
The SL6106SE is a high-efficiency 1.5MHz synchronous step down DC/DC regulator IC capable of delivering up to 1.5A output current. The device is available in an adjustable version. Supply current with no load is 40uA and drops to <1uA in shutdown. The 2.7V to 5.5V input voltage range makes the SL6106SE ideally suited for single Li-Ion battery powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems. PWM/PFM mode operation provides very low output ripple voltage for noise sensitive applications.
The JW5211 is a CMOS step-down DC/DC regulator consisting of a reference voltage source, an oscillator, a comparator, and a PWM/PFM control circuit. It utilizes PWM/PFM auto-switching control circuit to achieve adjustable duty cycle and features low ripple, high efficiency and high output current over the full input voltage range (1.8-5.5V). The JW5211 has a built-in power MOSFET, which is protected by a number of protection circuits such as over-voltage, over-current, over-temperature, and short-circuit, and is automatically disconnected when it exceeds the control value in order to protect the chip. This product combines the features of miniature package and low current consumption, and is most suitable for use inside the power supply of mobile devices.
The SL8088 is a high-efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version. Supply current with no load is 40uA and drops to<1uA in shutdown. The 2.5V to 5.5V input voltage range makes the SL8088 ideally suited for single Li-Ion battery powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems. PWM/PFM mode operation provides very low output ripple voltage for noise sensitive applications. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors. Low output voltages are easily supported with the 0.6V feedback reference voltage. The SL8088 requires a minimal number of readily available, external components and is available in a space saving SOT23-5 package.
The TP6841S6 device is high-eficiency, synchronous step-down DC/DC regulators. With a wide input range.it is suitable for a wide range of applications, such as power conditioning from unregulated sources. It features a low RDSON (250m(2/150m typical) internal switch for maximum efficiency (92% typical). Supports PSM mode, the operating frequency is fixed at 800kHz, allowing the use of small external components while still being able to have low output voltage ripple. With OVP function, the IC can stand off input voltageas high as 42V. The TP6841S6 supports 1.2A continuous output current, and it has a 0.8V nominal feedback voltage. Additional features include: thermal shutdown, Vin undervoltage lockout, and gate drive undervoltagelockout. The TP6841S6 is available in a low-profile SOT23-6 package.
The SL2733 is a DC/DC boost converter that can provideconstant and precise drive currents for multiple LEDs synchronously. With a fixed switching frequency of 1MHz, the SL2733 can be used with external ceramic capacitors and inductors with small consumption. Also, the SL2733 can drive multiple LEDs connectedin series via an adjustable current set by an external resistor R1. And the SL2733 might prove most useful in driving LEDs of the same type, with 9 white LEDs at most connected in series simultaneously, or driving LED brightness adjustment of up to 32 volts through one DC voltage, one logic or pulse width modulation (PWM) signal. What’s more,the（SHDN）allows the device tooperate in power-down mode with extremely low quiescent current. So in addition to thermal shutdown and overload current limit, it can also turn its chips, available in SOT23-5 small outline package, into ultra-low power consumption mode in the event of an open-circuit failure in LED.
The SL2359 is a high efficiency 1.5MHz,synchronous step-down DC-DC converter capableof delivering up to 1.2Acurrent with force PWM operation and adopts COT control with fasttransient response performance. SL2359integrates both high and low side switch with lowRDS(ON) to minimize the conduction loss.Low output voltage ripple and small external inductor andfrequency.capacitor size are achieved with1.5MHzswitching.The SL2359 requires a minimum number of readily available standard external components and is available in a 6-pin SOT23-6 RoHScompliant package.
The SY8120B are high efficiency 600KHz synchronous step-down DC-DC converters capable of delivering 2.0A output currents, respectively. SY8120B operate over a wide input voltage range from 4V to 18V and integrate main switch and synchronous switch with very low RDS(ON) To minimize the conduction loss.Low output voltage ripple and small external inductor and capacitor sizes are achieved with 600KHz switching frequency.
