Display 3D model
Service hotline
+86 0755-83044319
The SL9062 (dual), and SL9064(quad) are dualand quad low voltage (1.5V to 5.5V) operational amplifiers(opamps)with rail-to-rail input and outputswing capabilities. These devices are very suitableforapplications where lowvoltage operation, a small footprint, and high capacitive load drive are required.SL9062Sand SL9064S arewith Shutdown function.
Download datasheet Inquiry
25MHz RRIO Operational Amplifiers (Dual/Quad)
Description
l The SL9062 (dual), and SL9064(quad) are dualand quad low voltage (1.5V to 5.5V) operational amplifiers(opamps)with rail-to-rail input and outputswing capabilities. These devices are very suitable for applications where low voltage operation, a small footprint, and high capacitive load drive are required.SL9062Sand SL9064S are with Shutdown function.
Features
l Excellent THD+N100dB
l ExcellentSNR110dB
l Rail-to-rail input and output
l Low input offset voltage: ±0.5mVtyp
l Unity-gain bandwidth: 25MHz
l Low quiescent current(per opamp): 400μAtyp
l Operational at supply voltages as low as 1.5V
l Easier to stabilize with higher capacitive load dueto resistive open-loop output impedance
l Shutdown function (SL9062Sand SL9064S)
Application
l Infotainment system
l HVAC: heating, ventilating, and air conditioning
l Motor control
l Wearable devices
l Sensor signal conditioning
l Power modules
l Active filters
| File Name | Title | Description |
|---|---|---|
| SL9062C SOP-8.pdf | SL9062C SOP-8 | - |
Support
If you need design/technical support, please let us know and fill inResponse FormWe will get back to you as soon as possible.
Longevity
The Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our executive Management Team. View ourlongevity programhere.
Alternative equivalent for Texas Instruments TLV9062 | Slkor SL9062C General Op-amp
The SL8631 (single), SL8632 (dual), and SL8634 (quad) are low-noise, low-voltage, and micropower operational amplifiers. The SL863x family features 6.5MHz bandwidth, 4V/μs slew rate, and 480μA quiescent current per amplifier (5V supply voltage). The SL863x family of operational amplifiers can be designed into a wide range of applications. The SL863x operational amplifiers are designed to provide optimal performance for low-voltage and low-noise systems. Their input common-mode voltage range includes ground, and the maximum input offset voltage is 4.2mV. The SL863x can provide rail-to-rail output swing under heavy output loads. The SL863x family is suitable for single or dual supplies from +2.1V to +5.5V. All models are specified to operate over the extended industrial temperature range of -40℃ to +125℃. The SL8631 is available in 5-pin SC70 and SOT-23 packages. The SL8632 is available in 8-pin MSOP, DFN2*2, TSSOP, and SOP packages. The SL8634 is available in 14-pin TSSOP and SOP packages.
SL8551 (single), SL8552 (dual) and SL8554 (quad) are high-precision, rail-to-rail input and output operational amplifiers. The chip uses offset correction technology, so it has very low offset voltage (typical value 2μV), and the offset voltage hardly changes with temperature and time. The chip supports single power supply and dual power supply. When powered by a single power supply, its power supply voltage range is +2.3V to +5.5V; when powered by a dual power supply, its power supply voltage range is ±1. 15V to ±2.75V. The package types of SL8551 are mainly SC70-5, SOT23-5, MSOP-8 and SOP-8. The package types of SL8552 are mainly MSOP-8 and SOP-8. The package type of SL8554 is mainly SOP-14. And the operating temperature range for all package types is -40℃ to 125℃.
SL721 (single), SL722 (dual), SL723 (single with shutdown), and SL724 (quad) is a versatile operational amplifier with low noise, low voltage, and low power consumption, suitable for a wide range of applications. With an 11MHz gain-bandwidth product and 10V/μs slew rate, the S L7 21/2/3/4 are low-noise, low-voltage, low-power operational amplifiers with a power-down disable function that reduces supply current to less than 1μA. S L7 2 3 has a power- down disable function that reduces the supply current to less than 1 μA.
The OP07 chip is a low-noise, offset voltage trimmed, bipolar operational amplifier integrated circuit. Due to its very low input offset voltage (maximum offset voltage not exceeding 150μV), the OP07 IC often does not require additional zero adjustment measures in many application scenarios.
The NE5532 includes two independent, low-noise dual operational amplifiers with internal frequency compensation. It features high slew rate, low output noise, and is suitable for high-quality audio equipment, instrumentation, and control systems. ?The NE5532 is available in DIP8 or SOP8 package configurations.
The SL8052A is a rail-to-rail dual channels operational amplifier with wide supply range from 4.5V to 16V. It provides 0.5V beyond the supply rails of common mode input range and capability of rail-to-rail output swing as well. This enables the amplifier to offer maximum dynamic range at any supply voltage among many applications. A 8MHz gain bandwidth product allows SL8052Ato perform more stable than other devices in Internet applications. With features of 20V/μs high slew rate and 200ns of fast settling time, as well as 30mA (sink and source) of high output driving capability, the SL8052A is ideal for the requirements of flat panel Thin Film Transistor Liquid Crystal Displays (TFT-LCD) panel grayscale reference buffers application. Due to insensitive to power supply variation, SL8052A offers flexibility of use in multitude of applications such as battery power, portable devices and anywhere low power consumption is concerned. With standard operational amplifier pin assignment, the SL8052A is offered in a space saving 8-Pin MSOP package and specified over the -40°C to +85°C temperature range.
LM258A is composed by two independent high-gain operational amplifiers.It can work with either a single power supply or two power suppliers,and the power consumption current of the power supply is irrelevant to the value of the supply voltage. The applied ranges include audio frequency amplifiers, industrial control, DC gain parts and all the conventional operational amplifier circuits.
