【Daily Highlight】Slkor 15 V ESD Diode SLPESD15VL1BA: Tiny, Stable, ESD-Robust

Daily Highlight|Featured Products|

2025-07-19 17:15:42 772

When 15 V-powered industrial sensors, automotive ECUs, or PoE switch ports are hit by the triple threat of ESD, CDE, and EFT, a single TVS diode with precise clamping, low capacitance, and nano-amp leakage often determines field-failure rates. The Slkor SLPESD15VL1BA was engineered for exactly this need—a unidirectional, single-line ESD protector whose key numbers come straight from the datasheet and website, no embellishment.

Read the Datasheet, Spot the Real Need

? VRWM = 15 V

Lets the part sit permanently on a 15 V rail or RS-485 bus without false triggering.

? VBR min = 16.7 V

Provides ≥1.7 V of noise margin, preventing early conduction due to ripple or spikes.

? VC = 24 V @ 1 A

Under an IEC 61000-4-2 8 kV contact-discharge pulse, residual voltage stays well below the 40 V absolute-maximum rating of common 15 V interface ICs.

? CJ = 68 pF

Maintains clean eye diagrams up to ~100 MHz single-ended or low-speed differential lines; paralleling a 100 nF coupling cap keeps total capacitance in spec.

? IR = 1 μA max (25 °C)

Less than half the self-discharge current of a coin cell—no standby-power headache for 24/7 industrial nodes.

? IEC 61000-4-2 ±15 kV air / ±8 kV contact

Meets the lab’s “zap-it-till-it-breaks” top tier.

? PPP = 350 W (8/20 μs)

Absorbs 350 W in micro-seconds, sparing PCB traces and connectors from becoming weak links.

? SOD-323 2-pin, 1.7 mm × 1.25 mm × 1.1 mm

60 % smaller footprint than SOT-23—fits right between a Type-C receptacle and an RJ45.

? 260 °C / 10 s reflow, MSL 1, 3 000 pcs/reel

drop-in ready for high-speed pick-and-place lines; no baking required within one year of unseal.

Why 15 V Lines Demand Custom TVS

Legacy 5 V or 12 V TVS parts either break down too soon on 15 V rails or clamp too high; 24 V TVS diodes often exceed 100 pF, collapsing the eye of 125 MHz Ethernet PHYs. SLPESD15VL1BA’s 15 V VRWM + 24 V VC sweet spot eliminates both false triggers and over-voltage in one shot.

Proven in the Field

Industrial RS-485 / CAN-FD

Bus idle at 12 V, load-dump spikes to 24 V; two SLPESD15VL1BAs on A and B lines clamp 8 kV ESD to 24 V within 1 ns, keeping MCU UARTs safe.

Automotive LIN

Battery cold-crank drops to 6 V, load-dump soars to 40 V. With LIN transceivers rated at 45 V, the 24 V clamping level leaves >20 V safety margin.

USB-C PD 3.1 VBUS 15 V Rail

At 5 A, PCB copper area is only 5 mm2; measured temperature rise <10 °C with TVS and sense resistor sharing the same pad.

15 V PoE Ethernet

68 pF junction capacitance yields <0.3 dB insertion loss at 125 MHz—better than the IEEE 802.3at 0.5 dB limit.

Lab-Grade Validation

? IEC 61000-4-2 8 kV contact: residual 22 V, 15 V interface pin sees 20 V—100 % safety margin.

? IEC 61000-4-4 1 kV EFT: pulse energy reduced by 85 %—EMI test passed on first try.

? 85 °C / 1 000 h HTOL: leakage drift <0.1 μA—parameters remain rock-solid.

Full Ecosystem

Visit www.slkoric.com for compatible ESD families and end-to-end support.

Bottom Line

ESD protection for 15 V interfaces is no longer the “grab-any-TVS-and-solder” era. With its precise 15 V VRWM, 24 V VC, 68 pF CJ, and 1 μA IR, the SLPESD15VL1BA stands guard over the last centimeter in industrial, automotive, and PoE 15 V links, letting engineers focus on bigger innovations.

About Slkor：

SLKOR, headquartered in Shenzhen, China, is a rapidly emerging national high-tech enterprise in the power semiconductor sector. With R&D centers in Beijing and Suzhou, its core technical team originates from Tsinghua University. As an innovator in silicon carbide (SiC) power device technology, SLKOR's products are widely used in new energy vehicles, photovoltaic power generation, industrial IoT, and consumer electronics, providing critical semiconductor solutions to over 10,000 clients globally. The company delivers more than 2 billion units annually, with its SiC MOSFETs and 5th-generation ultrafast recovery SBD diodes setting industry benchmarks in efficiency ratio and thermal stability. SLKOR holds over 100 invention patents and offers 2,000+ product models, continually expanding its IP portfolio across power devices, sensors, and power management ICs. Certifications including ISO 9001, EU RoHS/REACH, and CP65 compliance demonstrate the company's steadfast commitment to technological innovation, lean manufacturing, and sustainable development.

Prev:: What is the principle of the Hall sensor and what is its use?

Next:: 【Daily Highlight】Slkor Launches SLPESD5V0L1BA ESD Protection Diode, Safeguarding Signal Integrity of Electronic Devices Across Multiple Fields with SOD-323 Package

【Daily Highlight】Slkor 15 V ESD Diode SLPESD15VL1BA: Tiny, Stable, ESD-Robust

Advisory Service